Description
X-Shield StainBlock Sealer is a high-performance, water-dispersed fluorosurfactant sealer designed to create a durable, invisible barrier that resists both oil and water-based stains. It penetrates deeply into porous substrates such as concrete, brick, natural stone, unglazed tile, and grout — providing long-lasting protection without altering the natural appearance of the surface. The non-film-forming formula allows the surface to breathe while delivering excellent hydrophobic and oleophobic performance, making it ideal for indoor and outdoor applications.
Available Pack Sizes
• 5 L
• 20 L
Stock Status
In Stock
Product Highlights
- Advanced water-based fluorosurfactant sealer
- Penetrates deeply into porous surfaces without forming a film
- Provides excellent resistance to oil, grease, and water stains
- Maintains the natural appearance of treated surfaces
- Breathable and UV-resistant formulation
- Ideal for interior and exterior stone, tile, and concrete finishes
Technical Specifications
| Property | Specification |
|---|---|
| Base | Water-based fluorosurfactant solution |
| Appearance | Clear liquid (dries invisible) |
| Specific Gravity | Approx. 1.00 @ 25°C |
| Film Formation | Non-film forming – penetrative barrier |
| pH Value | 7.0 ± 1.0 |
| Coverage | 6–10 m² per liter depending on surface porosity |
| Drying Time | Touch dry: 1 hour / Full cure: 24 hours |
| Water Resistance | Excellent hydrophobic protection |
| Oil Resistance | High oleophobic resistance to oils and grease |
| Shelf Life | 12 months (in original sealed container) |
Application Instructions
- Surface Preparation:
- Ensure surface is clean, dry, and free of oil, grease, and existing sealers.
- Repair cracks or defects before application for best performance.
- Application:
- Apply evenly using a low-pressure spray, roller, or brush until surface is fully saturated.
- Allow material to penetrate and dry for at least 1 hour before use.
- Note: Avoid over-application. A second coat may be applied wet-on-wet for very porous substrates.
Coverage Calculator
- 1 Liter covers approx. 6–10 m² depending on substrate porosity.
- 5 L can covers approx. 30–50 m².
Suitable Applications
- Concrete floors, driveways, and pavements
- Brick, stone, and unglazed tiles
- Grout joints and porous masonry
- Outdoor decorative concrete and architectural stone
Compatibility & Limitations
- Compatible with most porous mineral surfaces.
- Do not apply to painted, polished, or sealed surfaces.
- Not suitable for below-grade waterproofing.
Safety & Handling
- Non-toxic and solvent-free; safe for indoor use.
- Wear gloves and goggles during application.
- Clean tools with water immediately after use.
- Store in sealed containers away from frost and direct sunlight.
Frequently Asked Questions
It’s a water-based penetrating sealer that provides oil and water repellency on porous surfaces like stone, concrete, and brick.
No, it’s non-film-forming, allowing the substrate to breathe naturally.
It uses fluorosurfactant technology for superior stain resistance and long-term protection.
Yes, it performs excellently in both interior and exterior environments.
No, it’s completely clear and invisible after drying.
Apply with a low-pressure spray or roller, ensuring uniform saturation.
Approximately 6–10 m² per liter, depending on the substrate porosity.
It’s touch dry in 1 hour and fully cured in 24 hours.
No, it’s designed only for porous and unsealed surfaces.
12 months when stored in original, unopened containers.
Rate us and Write a Review
- SaturdayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
