Description
The Vario RAP is a versatile adjustable plane designed for shaping and smoothing plasterboards and wood surfaces. With 3 working positions and interchangeable rasps, it delivers precise material removal and excellent control for finishing and correction work.
Available Sizes
• Rasp surface: 250 mm x 35 mm
Stock Status
In Stock
Product Highlights
- 3 adjustable working positions
- Interchangeable rasps for extended use
- Large rasp surface for efficient material removal
- Ideal for plasterboard edge shaping and wood smoothing
- Ergonomic grip for controlled and comfortable operation
Technical Specifications
| Property | Specification |
|---|---|
| Tool Type | Adjustable plane / rasp tool |
| Working Positions | 3 adjustable positions |
| Rasp Surface | 250 mm x 35 mm |
| Primary Use | Shaping plasterboard & smoothing wood |
| Rasp Type | Interchangeable metal rasps |
Application Instructions
- Select the desired working position depending on the surface.
- Hold the plane firmly with both hands.
- Push or pull along the material to remove excess surface.
- Replace rasps easily when worn for consistent results.
- Clean tool after use to maintain efficiency.
Coverage Calculator
- Not applicable – manual surface shaping tool.
Suitable Applications
- Plasterboard edge shaping
- Wood surface smoothing
- Correcting uneven cuts
- Surface preparation before finishing
Compatibility & Limitations
- Compatible with plasterboards and soft–medium woods
- Not suitable for metal or concrete
- Use correct rasp type for best results
- Avoid excessive force to prevent rasp wear
Safety & Handling
- Wear gloves to avoid abrasion from rasp edges
- Keep fingers away from rasp surface while adjusting
- Secure workpiece before smoothing
- Store in a dry place after use
Frequently Asked Questions
The Vario RAP is used for shaping, smoothing and correcting edges on plasterboard and wood. Its adjustable positions allow users to customize the cutting angle for efficient material removal.
It features three adjustable working positions, allowing users to choose the best angle for shaping, smoothing or fine correction depending on the material and task.
Yes. The Vario RAP includes interchangeable rasps, making it cost-effective and long-lasting. When the rasp wears down, it can be replaced easily without changing the whole tool.
The rasp surface measures 250 mm x 35 mm, offering a wide cutting area suitable for fast material removal on plasterboard and wood surfaces.
Yes. It is easy to control, with an ergonomic design and adjustable positions. Even beginners can achieve smooth edges and correct uneven cuts accurately.
It is designed for plasterboards and wood. It should not be used on metal, cement board, tiles or concrete, as the rasp may wear out quickly or become damaged.
Definitely. The Vario RAP is ideal for correcting rough or uneven cuts on plasterboard, helping installers achieve smooth surfaces before jointing or finishing.
It produces moderate dust when used on plasterboard, so wearing a mask is recommended. On wood surfaces, it creates fine shavings depending on pressure and direction.
Clean the rasp after each use, remove debris from the teeth and store the tool in a dry place. Replace rasps when worn for best performance.
Yes. It is widely used by drywall installers, carpenters and interior finishing professionals due to its durability, precision and adjustable working positions.
Rate us and Write a Review
- Closed Now07:30 AM - 05:00 PM
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
