TAL Screedmaster Industrial is a single-component, high-performance, heavy-duty self-levelling and smoothing underlayment compound. It is manufactured from rapid-setting, shrinkage-compensated cement and selected aggregates. With excellent flow characteristics, it provides a smooth, flexible, and durable surface prior to installing floor coverings. It allows for minimum installation time and ensures long-lasting performance even under heavy traffic conditions.
Available Pack Sizes
• 22.00 kg
In Stock
| Property | Specification |
|---|---|
| Base | Shrinkage-Compensated Rapid-Setting Cement |
| Appearance | Grey Powder |
| Mixing Ratio | As per manufacturer’s instruction (approx. 4.5L water per 22kg) |
| Working Time | 15–20 minutes @ 25°C |
| Initial Set | Approx. 30 minutes |
| Full Cure | 24 hours @ 25°C |
| Compressive Strength | >30 MPa @ 28 days |
| Coverage | Approximately 1.8 kg/m²/mm thickness |
| Application Thickness | 3mm – 50mm |
| Shelf Life | 12 months (in sealed, unopened bags) |
| Storage Conditions | Store in a dry, covered area, away from direct sunlight and moisture |
It’s used for creating smooth, level, and durable floor bases in industrial and commercial areas.
Yes, it’s specially formulated for industrial and warehouse floors that endure heavy loads.
It can be applied both manually or with a screed pump, depending on the project size.
Typically within 24 hours, once the surface is fully cured and dry.
Approximately 1.8 kg/m²/mm thickness, depending on the substrate.
From 3mm to 50mm in a single layer.
Yes, it’s suitable for both, provided surfaces are sound and clean.
Yes, a primer is recommended on porous or absorbent surfaces to enhance adhesion.
Mix with clean water until a smooth, lump-free consistency is achieved.
12 months in a sealed, unopened bag when stored in a cool, dry area.
Your request has been submitted successfully.
Own or work here?