High-strength PVC solvent cement formulated for bonding PVC pipes, fittings, conduits, and irrigation systems. Fast-setting, clear adhesive designed for pressure and non-pressure applications.
STOCK STATUS
In Stock
| Specification | Details |
|---|---|
| Type | PVC Solvent Cement |
| Base | Tetrahydrofuran (THF) + PVC Resin |
| Appearance | Clear liquid |
| Viscosity | Medium |
| Density | ~0.90 g/cm³ |
| Working Time | 1–2 minutes |
| Initial Set Time | 10–15 minutes |
| Full Cure Time | 24 hours |
| Joint Strength | High bonding, leak-proof |
| Temperature Range | -5°C to 50°C |
| Pressure Rating | Suitable for cold water pressure systems |
| Shelf Life | 12–18 months |
One 100 ml bottle can bond approx. 8–10 average PVC joints.
(Based on 20–30 mm pipe size)
Yes, for cold water pressure pipes.
No. Use CPVC cement for hot water.
Minimum 24 hours.
Yes, it becomes clear.
Recommended but not compulsory for small sizes.
No, surfaces must be dry.
Yes, once fully cured.
Yes, if tightly sealed.
1–2 minutes.
Yes, low temperature slows drying.
Your request has been submitted successfully.
Own or work here?