Description
PEKAY SAFBOND is a high-strength reinforcing membrane designed for use with PEKAY Rubberseal 570, ACRYLSEAL 835, and other compatible waterproofing coatings. It is engineered to enhance the durability, stability, and crack-bridging performance of waterproofing systems, especially in areas with large cracks, movement zones, joints, or structurally weak surfaces.
The membrane provides excellent reinforcement for both horizontal and vertical applications. When embedded into wet waterproofing coatings, SAFBOND forms a strengthened composite layer that significantly improves the waterproofing system’s resistance to splitting, tensile stress, and substrate instability. Ideal for roofing systems, exterior walls, parapets, and other critical waterproofing points, SAFBOND ensures long-lasting performance and superior membrane reliability under challenging site conditions.
Available Pack Sizes
• 100 mm x 20 m
• 150 mm x 20 m
• 1 m² / 2 m² sheets
COVERAGE
Coverage depends on area size and extent of reinforcement required.
Stock Status
In Stock
Product Highlights
- High-strength reinforcing membrane for waterproofing systems
- Compatible with Rubberseal 570 and ACRYLSEAL 835
- Ideal for large roof cracks, wall cracks, and movement joints
- Enhances durability and tensile strength of coatings
- Improves crack-bridging ability and overall membrane reliability
- Suitable for roofing, exterior walls, parapets, and detailing
Technical Specifications
| Property | Specification |
|---|---|
| Product Type | Reinforcement membrane for waterproofing systems |
| Material | Durable reinforcing fabric/membrane |
| Usage | Embedded into liquid waterproofing coatings |
| Compatible Coatings | Rubberseal 570, ACRYLSEAL 835, and similar systems |
| Typical Applications | Roof cracks, wall cracks, joints, parapets, and detailing areas |
Application Instructions
- Clean the surface thoroughly before application.
- Apply the first coat of waterproofing product (e.g., Rubberseal 570 or ACRYLSEAL 835).
- While the coating is still wet, embed the SAFBOND membrane smoothly without wrinkles.
- Press firmly to ensure full contact with the substrate and the wet coating.
- Apply a second coat to completely cover and seal the membrane.
- Allow proper curing time before applying further layers or finishes.
Coverage Calculator
- Use based on width and length of cracks or reinforcement areas.
Suitable Applications
- Large cracks in roofs and walls
- Movement joints and unstable surfaces
- Parapet walls and detailing areas
- Reinforcement under acrylic and bitumen waterproofing systems
- Residential, commercial, and industrial waterproofing projects
Compatibility & Limitations
- Compatible with Rubberseal 570, ACRYLSEAL 835, and similar systems
- Not intended to be used alone without a waterproofing coating
- Should not be applied to dusty or weak surfaces without preparation
- Avoid dry embedding — must be applied over wet coating
Safety & Handling
- Wear gloves during handling to avoid abrasions
- Store in a dry area away from direct sunlight
- Keep rolls flat and avoid crushing or creasing
Frequently Asked Questions
For reinforcing waterproofing membranes over cracks and weak substrates.
Yes, fully compatible.
Yes, it is designed to work with it.
100 mm x 20 m, 150 mm x 20 m, and 1–2 m² sheets.
Yes, it is specifically made for large roof and wall cracks.
Yes, it adds tensile strength and durability.
Embedded into wet waterproofing coatings.
Yes, for both interior and exterior waterproofing works.
No, it must always be used with a waterproofing product.
Yes, it is ideal for roofing reinforcement.
Rate us and Write a Review
- SundayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
