JAYCOSEAL Primer G317 is a two-component, solvent-based general-purpose primer designed to enhance the adhesion of sealants, coatings, and epoxy systems. Its low-viscosity formulation allows deep penetration into porous substrates, improving surface bonding strength. Suitable for use on concrete, masonry, steel, and wood surfaces, it provides an ideal surface pre-treatment for subsequent applications. Not suitable for glass, stainless steel, or polyolefin plastics.
Available Pack Sizes
• 500 g
• 1 kg
• 5 kg
In Stock
| Property | Specification |
|---|---|
| Base | Solvent-Based Epoxy Resin |
| Type | Two-Component Primer |
| Appearance | Clear / Light Amber Liquid |
| Mix Ratio (by weight) | 3 : 1 (Resin : Hardener) |
| Viscosity | Low, Penetrative Consistency |
| Pot Life | Approx. 40–50 minutes @ 25°C |
| Touch Dry Time | 1–2 hours (depending on temperature and humidity) |
| Full Cure | 24 hours @ 25°C |
| Coverage | 5–7 m²/kg (depending on surface porosity) |
| Shelf Life | 12 months (in original sealed container) |
| Storage Conditions | Store below 30°C in a cool, dry place away from direct sunlight |
It’s a general-purpose primer used to improve adhesion between porous surfaces and coatings, sealants, or adhesives.
It’s a two-component solvent-based epoxy primer with low viscosity for deep penetration.
It’s suitable for concrete, steel, wood, and masonry substrates.
No, it’s not suitable for glass, stainless steel, or polyolefin plastics.
Apply with a brush, roller, or spray after thoroughly mixing the two components (3:1 ratio).
Approximately 5–7 m²/kg, depending on surface porosity and texture.
Touch dry in 1–2 hours, fully cured in 24 hours at 25°C.
Yes, it’s ideal as a pre-treatment primer to enhance bond strength for epoxy, polyurethane, and acrylic systems.
Store in a cool, dry place below 30°C, away from direct sunlight.
Use in well-ventilated areas, wear gloves and goggles, and keep away from open flames and sparks.
Your request has been submitted successfully.
Own or work here?