Description
Jaycoseal 272 – High-Strength Solvent-Free Epoxy Adhesive (Available in Mauritius)
JAYCOSEAL 272 is a two-component, high-performance epoxy adhesive and grouting compound. It is suitable for use as a general-purpose adhesive for bonding various materials such as metal, stone, concrete, and wood. The product is also ideal for fixing steel rods, bolts, and dowels into concrete or masonry structures. It provides high bond strength, excellent chemical resistance, and durable structural performance. Available in Mauritius, it’s widely used in construction for structural anchoring and high-strength bonding.
Available Pack Sizes
• 500 g
• 1 kg
• 2 kg
• 5 kg
Stock Status
In Stock
Product Highlights
- Two-component solvent-free epoxy adhesive and grout
- Excellent adhesion to concrete, steel, stone, and wood
- High compressive and bond strength for structural applications
- Resistant to water, oils, and mild chemicals
- Non-shrink and easy to mix and apply
Technical Specifications
| Property | Specification |
|---|---|
| Base | Two-component Epoxy Resin System |
| Appearance | Part A – Light Grey / Part B – Amber Viscous Liquid |
| Mix Ratio (by weight) | 2:1 (Resin : Hardener) |
| Pot Life | 30 minutes @ 25°C |
| Compressive Strength | > 60 MPa @ 7 days |
| Bond Strength (Concrete) | > 3 MPa (Concrete Failure) |
| Curing Time | Initial: 6–8 hours / Full Cure: 24 hours @ 25°C |
| Chemical Resistance | Excellent resistance to water, oils, and mild acids |
| Shelf Life | 12 months (sealed, unopened container) |
| Storage Conditions | Store in a cool, dry place below 30°C |
Application Instructions
- Surface Preparation:
- Ensure all surfaces are sound, clean, and dry.
- Remove oil, grease, dust, and loose materials before application.
- Roughen smooth surfaces for better adhesion.
- Application:
- Mix Part A and Part B thoroughly in the prescribed ratio until a uniform consistency is obtained.
- Apply mixed epoxy to both surfaces for adhesive applications or pour directly into anchor holes for grouting.
- Insert rods or bolts immediately and allow to cure undisturbed.
- Note: Apply only within pot life and ensure adequate ventilation during use.
Coverage Calculator
- Approx. 4–5 m²/kg for bonding applications, depending on surface texture.
- For grouting, consumption depends on hole size and embedment depth.
Suitable Applications
- Fixing steel rods, bolts, and anchors into concrete or stone
- Structural bonding of metal, stone, and concrete
- General-purpose epoxy adhesive
- Repair and filling of structural cracks
Compatibility & Limitations
- Compatible with concrete, steel, stone, and wood substrates.
- Avoid use on damp or oily surfaces.
- Not suitable for flexible or vibrating joints.
Safety & Handling
- Wear protective gloves, goggles, and clothing during application.
- Avoid inhaling vapors or direct skin contact.
- Use in a well-ventilated area.
- Keep away from open flames and children.
Frequently Asked Questions
It’s used as a structural epoxy adhesive and grouting compound for fixing rods, bolts, and dowels into concrete or stone.
Yes, it bonds most materials like metal, concrete, stone, and wood effectively.
Mix 2 parts resin (A) to 1 part hardener (B) by weight.
Pot life is approximately 30 minutes at 25°C.
It achieves >60 MPa compressive strength and concrete failure bond strength.
No, surfaces must be clean and dry for best adhesion.
Yes, it offers excellent resistance to water, oils, and mild acids.
Yes, it’s suitable for structural crack filling and joint sealing.
Initial cure in 6–8 hours, full strength in 24 hours.
Keep in sealed containers below 30°C, away from heat and direct sunlight.
Rate us and Write a Review
- Closed Now07:30 AM - 05:00 PM
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
