Description
CONMIX RECON PH is a polymer-modified, cementitious fairing coat and repair mortar formulated for thin surface applications. It is designed for repairing concrete and plaster surfaces by filling blow holes, small surface imperfections, and minor cracks before painting or coating. RECON PH provides an exceptionally smooth finish with excellent bonding, durability, and weather resistance. Suitable for both interior and exterior use, it ensures long-lasting surface protection and aesthetic enhancement.
Available Pack Sizes
• 1 Kg
• 5 Kg
• 25 Kg
Stock Status
In Stock
Product Highlights
- Polymer-modified thin fairing coat mortar
- Provides smooth and even finish for concrete and plaster surfaces
- Excellent bonding strength and adhesion
- Non-shrink and easy to apply with trowel or spatula
- Ideal for repairing blowholes, cracks, and surface defects
- Suitable for internal and external applications
Technical Specifications
| Property | Specification |
|---|---|
| Base | Polymer-modified cementitious composition |
| Color | Grey / Off-white |
| Density | Approx. 1.8 g/cm³ |
| Mixing Ratio | 4–5 L of water per 25 Kg bag |
| Application Thickness | Up to 3 mm per coat |
| Working Time | 30–40 minutes @ 25°C |
| Compressive Strength | ≥ 15 MPa @ 28 days |
| Bond Strength | ≥ 1.0 MPa |
| Shelf Life | 12 months (unopened, stored dry) |
| Storage Conditions | Store in a cool, dry place away from moisture and direct sunlight |
Application Instructions
- Surface Preparation:
- Ensure the surface is clean, sound, and free of dust, oil, or loose materials.
- Dampen the surface before application but avoid standing water.
- Mixing:
- Gradually add powder to water and mix until a smooth, lump-free paste is formed.
- Allow the mix to stand for 2–3 minutes before application.
- Application:
- Apply using a steel trowel or putty knife in thin layers (1–3 mm).
- Smooth and level the surface; multiple coats can be applied if needed.
- Note: Protect the surface from direct sunlight and rain during curing.
Coverage Calculator
- 1 Kg covers approximately 0.4–0.5 m² at 2 mm thickness.
- 25 Kg bag covers approx. 10–12.5 m² depending on surface roughness.
Suitable Applications
- Concrete surface repairs and refinishing
- Fairing coat before painting or coating
- Repair of blowholes and surface imperfections
- Plastered wall smoothing and touch-ups
Compatibility & Limitations
- Compatible with concrete, mortar, and plaster substrates.
- Not suitable for structural repairs or heavy load-bearing areas.
- Avoid applying over painted or contaminated surfaces.
Safety & Handling
- Wear gloves, mask, and safety goggles during mixing and application.
- Avoid inhalation of dust and contact with skin or eyes.
- Wash tools and hands with clean water immediately after use.
Frequently Asked Questions
It’s a thin polymer-modified fairing coat used for repairing and finishing concrete and plaster surfaces.
Yes, it’s ideal for surface preparation before painting or coating.
Apply up to 3 mm per coat for best performance.
Yes, it’s designed for both interior and exterior surfaces.
Mix 4–5 L of water per 25 Kg bag until a smooth paste is achieved.
Approximately 10–12.5 m² at 2 mm thickness.
No, remove any paint or loose material before application.
Allow 24 hours for full curing before applying paint or coatings.
No, it is a powder product that must be mixed with water before use.
12 months in original sealed packaging stored in a dry, cool environment.
Rate us and Write a Review
- SaturdayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
