CONMIX NanoGrout GP – Non-Shrink Cementitious Grout (Available in Mauritius)
CONMIX NANO GROUT GP is a ready-to-use, flowable, non-shrink cementitious grout engineered for general-purpose grouting and concrete repair applications. It is self-levelling, designed to fill intricate voids, offers controlled expansion to compensate for shrinkage, and provides high early and long-term strength without bleeding or segregation. Built for modern construction needs in Mauritius, CONMIX NanoGrout GP delivers precision, durability, and long-lasting performance.
• 25 kg
In Stock
| Property | Specification |
|---|---|
| Base | Cementitious blend with shrinkage-compensating additives and selected fillers |
| Appearance | Grey powder |
| Mixing Water (per 25 kg) | Approximately 4.5–5.5 litres (based on required flow) |
| Consistency | Flowable / Self-leveling |
| Pot Life | 20–40 minutes at 25°C |
| Initial Set | 1–2 hours (depending on conditions) |
| Full Cure | 7–28 days |
| Controlled Expansion | Expands during early curing to prevent shrinkage |
| Coverage | One 25 kg bag yields approx. 12–15 litres of grout |
| Shelf Life | 12 months (unopened, dry storage) |
| Storage Conditions | Store in a cool, dry place away from moisture |
It’s a ready-to-use, flowable non-shrink grout for filling voids, repairing honeycombed concrete, underplate grouting (non-critical), and general-purpose concrete repair.
Use approximately 4.5–5.5 litres of water per 25 kg bag — adjust slightly to reach a flowable consistency; avoid adding excess water.
Yes — it is flowable and self-levelling, making it suitable for filling intricate voids and pockets.
Yes — it contains shrinkage-compensating additives and exhibits controlled expansion during early cure to prevent settlement.
The grout gains initial set within 1–2 hours; strength increases over days. For light loading, allow at least 24 hours; for full service loads, follow project engineer guidance.
Yes — the flowable nature allows for pumping for many applications; test your pump compatibility beforehand.
For structural-critical or heavily loaded applications consult a structural engineer; this product is intended for general-purpose, non-critical grouting unless otherwise specified.
Surfaces should be clean, sound, and saturated surface dry (SSD). Remove loose material, oil, and dust before placing grout.
Protect placed grout from rapid drying for at least 24 hours — use wet curing, damp burlap, or a suitable curing compound depending on site conditions.
12 months in unopened bags stored dry and off the ground. Keep away from moisture and direct sunlight.
Your request has been submitted successfully.
Own or work here?