CONMIX JetCure WB – Water-Based Concrete Curing Compound (Available for Projects in Mauritius)
CONMIX JETCURE WB is a water-based curing compound designed to retain moisture in freshly placed concrete to ensure complete hydration and strength development. It forms a thin, continuous and non-staining membrane that prevents rapid water loss from concrete surfaces. JETCURE WB eliminates the need for traditional water curing methods, is non-toxic and environmentally friendly, making it ideal for both internal and external concrete works where solvent-based compounds are not suitable. This product is also well-suited for construction projects across Mauritius, especially in hot and humid conditions where efficient moisture retention is essential for proper concrete curing.
Available Pack Sizes
• 5 L
• 25 L
• 200 L
In Stock
• Water-based, non-toxic curing compound
• Reduces shrinkage and cracking in freshly laid concrete
• Forms a continuous membrane to retain moisture
• Ready to use and easy to apply by spray or brush
• Ideal for indoor or poorly ventilated environments
• Complies with ASTM C309 Type 1, Class B standards
| Property | Specification |
|---|---|
| Base | Aqueous dispersion of synthetic resin |
| Appearance | Milky white liquid (dries to clear film) |
| Specific Gravity | Approx. 1.0 ± 0.05 @ 25°C |
| Drying Time | 45–90 minutes (depending on ambient temperature) |
| Moisture Retention | Meets ASTM C309 requirements |
| Coverage | 5–6 m² per liter (depending on surface texture) |
| Application Temperature | 5°C to 45°C |
| Compatibility | Compatible with most cement-based surfaces and coatings |
| Shelf Life | 12 months (in unopened condition) |
| Storage Conditions | Store in a cool, shaded area. Protect from frost and direct sunlight. |
Surface Preparation:
• Ensure all bleed water has evaporated before application.
• Surface should be free of dust and loose debris.
Application:
• Apply uniformly using a spray, roller, or brush as soon as the final concrete finish is achieved.
• Avoid over-application or ponding of material.
Note: Do not apply over areas where coatings or adhesives are to be applied unless the curing film is removed.
• 1 Liter covers approximately 5–6 m².
• 25 L drum covers approx. 125–150 m².
• Concrete slabs, pavements, and walls
• Precast concrete elements
• Indoor flooring and enclosed spaces
• Areas sensitive to solvent-based products
• Compatible with most cementitious and acrylic finishes.
• Not suitable for use at freezing temperatures or on hot, dry surfaces.
• Should not be applied if rain is expected within 2 hours.
• Non-toxic and safe for enclosed environments.
• Avoid ingestion and contact with eyes.
• Clean tools and equipment with water immediately after use.
• Store in sealed containers when not in use.
It’s used as a water-based curing compound to retain moisture in freshly poured concrete for proper curing.
Yes, it’s non-toxic, water-based, and environmentally safe.
Yes, it completely eliminates the need for continuous water curing.
It forms a thin membrane that locks in moisture to promote full cement hydration.
Approximately 5–6 m² per liter depending on surface texture.
Yes, it’s ideal for indoor and enclosed areas where solvent-based products aren’t suitable.
Usually 45–90 minutes, depending on temperature and humidity.
Yes, it can be used for both internal and external applications.
Only after removing the curing film mechanically or chemically.
12 months in unopened containers stored in a cool, shaded place.
Your request has been submitted successfully.
Own or work here?