White Pigmented General-Purpose Curing & Sealer for Concrete Surfaces in Mauritius
CONMIX JETCURE GP WHITE is an inorganic, water-based curing compound formulated to retain moisture in freshly placed concrete while allowing future finishes such as plasters, renders, or paints to be applied without additional surface preparation. It forms a temporary membrane that minimizes moisture loss, reduces shrinkage, and enhances cement hydration for higher strength and superior surface finish. The white pigmentation reflects sunlight, helping keep concrete cooler and reducing early-age surface cracking—ideal for Mauritius’ warm climate.
Suitable for both horizontal and vertical concrete surfaces, JetCure GP White ensures uniform curing, improved hydration, and consistent surface quality. Its reflective finish makes it especially effective for exposed concrete areas in Mauritius, where solar heat can accelerate moisture loss.
• 5 L
• 25 L
• 200 L
In Stock
| Property | Specification |
|---|---|
| Base | Inorganic, water-based composition |
| Appearance | White liquid with reflective pigments |
| Specific Gravity | Approx. 1.05 @ 25°C |
| Drying Time | 60–90 minutes (temperature dependent) |
| Coverage | 5–6 m² per liter (surface condition dependent) |
| Reflectivity | High – reduces surface temperature during curing |
| Film Type | Temporary film, removable or weather-degradable |
| Application Temperature | 5°C to 45°C |
| Shelf Life | 12 months (sealed, unopened containers) |
| Storage Conditions | Store in a cool, shaded area away from frost and direct sunlight |
It’s used as an inorganic curing compound for concrete surfaces that will later receive renders, paints, or coatings.
The white pigmentation reflects sunlight, helping reduce concrete surface temperature and shrinkage.
Yes, the temporary film can be coated directly or removed easily before applying paint.
Yes, it’s ideal for both internal and external concrete curing.
Approximately 5–6 m² per liter, depending on surface porosity.
JETCURE GP WHITE is inorganic and breathable, making it suitable for surfaces that need further finishing.
It typically dries within 60–90 minutes, depending on site conditions.
Yes, by retaining moisture, it reduces plastic shrinkage and surface cracking.
Yes, it’s non-toxic and odorless, safe for enclosed environments.
12 months in unopened containers stored in a cool, shaded area.
Your request has been submitted successfully.
Own or work here?