Description
CONMIX FIBER 12MM – 0.6GMS is a high-performance monofilament polypropylene fiber designed to reduce shrinkage cracking and improve the durability of concrete, screeds, and mortars. Made from 100% virgin polypropylene polymer, the fibers are chemically inert, non-corrosive, and uniformly dispersed in the mix. They enhance tensile strength, improve impact resistance, and increase resistance to water permeability and surface abrasion. The product is pre-packed, easy to use, and compatible with all types of cementitious materials.
Available Pack Size
• 0.6 Kg (Pre-packed)
Stock Status
In Stock
Product Highlights
- 100% virgin polypropylene monofilament fiber
- Improves tensile, flexural, and impact strength of concrete
- Reduces plastic shrinkage and micro-cracking
- Enhances surface finish and durability
- Non-corrosive, alkali resistant, and compatible with all cement mixes
- Ready-to-use and easily dispersible in concrete
Technical Specifications
| Property | Specification |
|---|---|
| Material | Virgin Polypropylene Polymer |
| Fiber Type | Monofilament |
| Fiber Length | 12 mm |
| Specific Gravity | 0.91 g/cm³ |
| Tensile Strength | ≥ 350 MPa |
| Elastic Modulus | 3500–4000 MPa |
| Melting Point | 160–165°C |
| Water Absorption | Nil |
| Dosage | 600 g per m³ of concrete (typical) |
| Alkali Resistance | Excellent |
Application Instructions
- Mixing:
- Add CONMIX FIBER directly into the concrete mixer during batching.
- Mix for 3–5 minutes to ensure even distribution throughout the mix.
- Application:
- Place and compact concrete as usual.
- No changes to curing process are required.
- Note: Do not mix with steel fibers or air-entraining agents without prior testing.
Coverage Calculator
- One 0.6 Kg pack is sufficient for approximately 1 m³ of concrete.
- For enhanced strength, dosage may be increased to 0.9 Kg/m³.
Suitable Applications
- Concrete floors, screeds, and pavements
- Plaster, precast panels, and tile adhesives
- Industrial flooring and shotcrete applications
- Roof slabs, basements, and water retaining structures
Compatibility & Limitations
- Compatible with all cementitious materials and admixtures.
- Not a replacement for structural reinforcement like steel bars or mesh.
- Avoid overdosing to prevent mix stiffness.
Safety & Handling
- Wear gloves and dust mask while handling fiber packs.
- Avoid inhalation of fiber dust during mixing.
- Store in a dry place away from moisture and direct sunlight.
Frequently Asked Questions
It’s used to reduce cracking, improve durability, and enhance the strength of concrete and plaster.
Made from 100% virgin polypropylene polymer, a strong and durable synthetic fiber.
Each fiber is 12 mm long, ideal for uniform distribution in concrete mixes.
The fibers form a three-dimensional network that controls shrinkage and micro-cracking during curing.
Typically 0.6 Kg per cubic meter of concrete.
No. It is not a structural reinforcement but complements it by reducing surface cracking.
Yes, it’s compatible with all cement additives, admixtures, and waterproofing agents.
The fibers have a melting point between 160–165°C.
It improves flexural, tensile, and impact strength without reducing compressive strength.
Yes, CONMIX FIBER is non-toxic, non-corrosive, and environmentally safe to handle.
Rate us and Write a Review
- SaturdayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
