Description
Gyproc RhinoBoard FireStop is a fire-resistant gypsum plasterboard with an aerated gypsum core reinforced with glass fibre and additives, encased in strong paper liners. It is designed for internal dry-lining and partition walls where enhanced fire protection and safety are required. When used as part of a certified FireStop system, this board can slow the spread of fire up to 120 minutes.
Available Sizes
• Thickness: 12.5 mm or 15 mm
• Width: 1200 mm
• Typical Lengths: 2700 mm / 3000 mm / 3600 mm (depending on stock and variant)
Stock Status
In Stock / On Request (depending on dealer / supplier availability)
Product Highlights
- Fire-resistant gypsum board — designed to provide fire protection in walls and partitions
- Core reinforced with glass fibre and additives for enhanced fire and structural performance
- Non-combustible board complying with fire-resistant wall system requirements
- Suitable for use in dry internal partitions and wall linings (not for wet/damp zones)
- Environmentally certified plasterboard with recycled content and third-party verified EPD (Environmental Product Declaration) for sustainability compliance
Technical Specifications
| Property | Specification |
|---|---|
| Board Type | Fire-resistant gypsum plasterboard (FireStop) |
| Core | Aerated gypsum + glass fibre and fire-resistant additives |
| Thickness | 12.5 mm or 15 mm |
| Width | 1200 mm |
| Available Lengths | 2700 / 3000 / 3600 mm |
| Fire Resistance (as part of correct system) | Up to 120 minutes fire-delay when installed per Gyproc FireStop system specs |
| Environmental Certification | EPD (Environmental Product Declaration) certified, non-combustible, non-hazardous board with recycled content |
Application Instructions
- Use in internal wall and partition systems requiring fire-resistant construction — both residential and commercial buildings.
- Install onto approved metal or timber stud framing per manufacturer’s FireStop drywall system designs; follow correct screw spacing and framing specs.
- Tape and joint all board edges and penetrations properly. Use compatible jointing compounds and finishing systems as per Gyproc guidelines.
- Not suitable for wet or damp areas — use only in dry internal walls or partitions.
- For maximum fire and acoustic performance, ensure full wall system is built per specifications (stud spacing, board layers, sealing, insulation if required).
Suitable Applications
- Internal partition walls in houses, apartments and residential buildings
- Commercial building interiors — offices, retail shops, hospitality spaces, storage rooms
- Fire- rated walls in buildings needing compliance with fire-safety regulations
- Wall linings in stairwells, corridors, service rooms, utility rooms where fire safety is critical
- Any dry-lined internal wall or partition system where fire and safety performance is priority
Compatibility & Limitations
- Compatible only with internal drywall framing and partition systems designed for fire-rated assemblies — not for external walls or load-bearing structural walls.
- Not suitable for damp or wet environments — avoid use in bathrooms, exteriors or areas with continuous moisture exposure.
- Fire performance (e.g. 120-minute rating) depends on correct installation as part of full fire-rated system with specified framing, fixings and finishes.
Safety & Handling
- Store boards flat on level supports in dry, covered indoor area until installation.
- Handle carefully — lift from long edge to avoid bending or damaging board edges or core.
- Wear gloves, dust mask and eye protection while cutting or drilling plasterboard.
- Ensure all joints, penetrations and service openings are properly sealed to maintain fire- and acoustic integrity of the wall.
Frequently Asked Questions
RhinoBoard FireStop is used for internal walls and partitions needing enhanced fire resistance — ideal for residential, commercial or institutional buildings where fire safety is critical. It is part of fire-rated drywall systems to slow fire spread up to 120 minutes.
The board comes in 12.5 mm and 15 mm thicknesses, both with 1200 mm width and common lengths of 2700, 3000 or 3600 mm depending on stock.
Yes. When installed correctly in a FireStop drywall system, RhinoBoard FireStop can delay fire spread by up to 120 minutes, giving occupants time to evacuate and reducing structural damage risk.
No. RhinoBoard FireStop is intended only for dry internal partitions. It is not designed for use in bathrooms, kitchens or areas with continuous moisture exposure.
Yes — it is suitable for both residential apartments/houses and commercial or institutional interiors like offices, retail stores, storage rooms, corridors, or any space needing fire-rated walls.
Install on approved metal or timber stud frames as part of a certified fire-rated drywall system. Use correct screw spacing, tape and joint all edges and penetrations, and finish as per specifications to ensure fire and acoustic performance.
Yes. RhinoBoard FireStop has an EPD (Environmental Product Declaration), is produced under certified environmental management systems, and qualifies as a “fit-for-purpose” certified interior plasterboard.
No. It is a non-loadbearing plasterboard meant only for partition and lining walls. Structural or load-bearing walls must use appropriate structural materials.
After fixing, board joints must be taped/jointed and the surface can be plastered, skim-coated or painted — just like standard drywall. Once finished, the wall maintains fire resistance and is ready for normal interior finishes.
Choose FireStop when your project demands fire-rated walls — for safety compliance, building codes, insurance requirements, or occupant protection. For ordinary dry partitions where fire safety is not a concern, standard boards may suffice.
Rate us and Write a Review
- SaturdayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
