Description
Threadlocker RED (9262) is a high-strength anaerobic adhesive designed for sealing and locking threaded fasteners. It is a single-component, thixotropic, acrylic-based formulation that cures when confined between close-fitting metal surfaces in the absence of air. It prevents loosening caused by vibration, shock, and thermal expansion, ensuring a secure and leak-proof assembly in demanding industrial applications.
Available Pack Sizes
• 50 mL
Stock Status
In Stock
Product Highlights
- High-strength formulation suitable for permanent locking of fasteners
- Prevents loosening due to vibration, impact, and mechanical stress
- Anaerobic curing ensures reliable sealing in the absence of air
- Thixotropic properties prevent running or dripping during application
- Ideal for bolts, nuts, studs, and threaded assemblies exposed to high load
Technical Specifications
| Property | Specification |
|---|---|
| Chemical Base | Acrylic anaerobic adhesive |
| Strength Level | Medium to high strength |
| Curing Method | Anaerobic (cures without air between metal surfaces) |
| Typical Applications | Threaded fasteners, studs, bolts, lock nuts |
| Viscosity | Thixotropic (non-runny) |
| Temperature Resistance | Typical resistance up to 150°C (varies by substrate) |
Application Instructions
- Clean the threads thoroughly to remove oil, dirt, and residue.
- Apply a small amount of Threadlocker RED to the male threads.
- Assemble the parts and tighten as required.
- Allow curing time for maximum strength; curing may vary based on material and temperature.
Coverage Calculator
- A 50 mL bottle is sufficient for multiple medium-sized fasteners; usage varies by bolt size and thread length.
Suitable Applications
- Automotive repair and engine assembly
- Industrial machinery and equipment
- Heavy-duty vibration-prone assemblies
- Metal fabrication and maintenance work
Compatibility & Limitations
- Suitable for most metal-to-metal threaded fasteners
- Not recommended for plastic threads or assemblies requiring frequent disassembly
- Heat or special tools may be required for removal due to high strength
Safety & Handling
- Avoid contact with skin and eyes; wash immediately after exposure
- Use in a well-ventilated area
- Store tightly closed in a cool, dry place
- Keep away from children
Frequently Asked Questions
It is used to permanently seal and lock metal threaded fasteners to prevent loosening.
Due to its high strength, removal may require heat or specialized tools.
No — it cures only in the absence of air and between metal surfaces.
No — it is intended only for metal-to-metal threaded assemblies.
Initial cure typically occurs in minutes; full cure may take several hours depending on temperature and materials.
Yes — it is specifically formulated to prevent loosening caused by vibration and mechanical shock.
Automotive, industrial machinery, metal fabrication, and heavy equipment maintenance.
Excess may squeeze out but will not affect performance; however, applying a moderate amount is recommended.
Yes — it typically withstands temperatures up to around 150°C, depending on metal type.
It can help seal threaded joints but is not a substitute for gasket sealants or pressure-specific sealing compounds.
Rate us and Write a Review
- SundayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
