Description
CONMIX RESIGARD SEALER is a premium water-dispersed acrylic sealer formulated to protect and enhance the appearance of natural stone, marble, granite, interlock blocks, masonry, and cementitious surfaces. It penetrates deeply into the substrate, forming a clear, durable film that resists dust, stains, and water ingress while providing a subtle sheen. The sealer allows the surface to breathe, maintaining the natural look of the substrate while offering long-term protection against weathering and moisture damage.
Available Pack Sizes
• 1 L
• 5 L
• 20 L
Stock Status
In Stock
Product Highlights
- Water-based acrylic sealer with high penetration
- Protects against dust, stains, and weathering
- Enhances the natural beauty of stone and masonry
- Provides a breathable, semi-gloss finish
- UV and alkali resistant for long-lasting performance
- Non-yellowing and environmentally friendly
Technical Specifications
| Property | Specification |
|---|---|
| Base | Water-dispersed acrylic polymer |
| Appearance | Milky white liquid (dries to clear film) |
| Specific Gravity | Approx. 1.00 ± 0.05 @ 25°C |
| Film Type | Clear, semi-gloss, breathable protective film |
| Drying Time | 30–60 minutes (touch dry), 4–6 hours (fully cured) |
| Coverage | 6–8 m² per liter (depending on porosity) |
| Finish | Clear semi-gloss or matte (based on application) |
| Application Temperature | 5°C to 40°C |
| Shelf Life | 12 months in original unopened containers |
| Storage Conditions | Store in a cool, dry place away from direct sunlight and frost |
Application Instructions
- Surface Preparation:
- Ensure the surface is clean, dry, and free of dust, oil, and loose material.
- For highly porous surfaces, apply two coats for best protection.
- Application:
- Apply evenly using a roller, brush, or spray.
- Allow the first coat to dry completely before applying a second coat if required.
- Note: Avoid applying under direct sunlight or when rain is expected within 4 hours.
Coverage Calculator
- 1 Liter covers approx. 6–8 m² per coat on smooth surfaces.
- 20 L drum covers approx. 120–160 m².
Suitable Applications
- Natural stone, marble, and granite surfaces
- Interlocking pavers and masonry blocks
- Concrete floors and cement screeds
- Exterior facades and decorative stonework
Compatibility & Limitations
- Compatible with most cementitious and masonry surfaces.
- Do not apply on wet or contaminated surfaces.
- Not recommended for polished or non-porous stone surfaces.
Safety & Handling
- Non-flammable and safe for indoor and outdoor use.
- Use protective gloves and goggles during application.
- Clean tools with water immediately after use.
- Keep containers sealed when not in use.
Frequently Asked Questions
It’s a water-based acrylic sealer used to protect and enhance natural stone, marble, granite, and masonry surfaces.
Yes, it’s non-toxic and low-odor, making it suitable for both indoor and outdoor use.
No, it enhances the natural appearance without altering the original color.
It dries to a clear semi-gloss finish, depending on the surface texture.
Usually one to two coats, depending on surface porosity and desired sheen.
Approximately 6–8 m² per liter per coat.
Yes, it is UV-stable and weather-resistant.
Not recommended for highly polished or non-porous stone surfaces.
Touch dry in 30–60 minutes, fully cured in 4–6 hours.
12 months when stored properly in sealed containers.
Rate us and Write a Review
- SundayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
