Description
TAL X-TECH INTRAFLOOR S is a high-performance, monolithic floor hardening compound formulated to provide a dense, abrasion-resistant, and durable concrete surface. It is specially designed for industrial floors, warehouses, workshops, and heavy traffic areas where long-lasting wear resistance is essential. The compound is a blend of hard-wearing mineral aggregates, selected cements, and performance-enhancing additives that ensure high surface strength and dust-free finish. When applied monolithically onto fresh concrete, it bonds integrally to the slab forming a permanent, hard surface layer.
Available Pack Size
• 25 Kg
Coverage
Approx. 3–5 kg/m² depending on the desired surface hardness and usage conditions.
Stock Status
In Stock
Product Highlights
- High-performance monolithic floor hardener
- Provides superior abrasion and impact resistance
- Reduces dusting and increases surface density
- Integrates with the concrete slab — no delamination
- Available in natural and pigmented finishes
- Ideal for heavy-duty industrial and commercial flooring
Technical Specifications
| Property | Specification |
|---|---|
| Base | Cementitious, mineral aggregate-based compound |
| Color | Natural Grey (other colors available upon request) |
| Aggregate Hardness | Mohs hardness ≥ 7 |
| Compressive Strength | ≥ 80 MPa @ 28 days |
| Flexural Strength | ≥ 10 MPa @ 28 days |
| Application Method | Dry shake onto freshly placed concrete |
| Recommended Dosage | 3–5 kg/m² |
| Surface Finish | Smooth, dense, abrasion-resistant finish |
| Shelf Life | 12 months (in sealed packaging) |
| Storage Conditions | Store in dry conditions, away from moisture and direct sunlight |
Application Instructions
- Surface Preparation:
- Ensure the base concrete is of good quality, well-compacted, and level.
- The concrete should be free from bleed water before applying the hardener.
- Application:
- Apply TAL X-TECH INTRAFLOOR S uniformly as a dry shake over freshly laid concrete.
- Spread approximately half the material, allow absorption of moisture, then apply the balance at right angles.
- Finish using a mechanical trowel to achieve a dense and smooth surface.
- Note: Apply curing compound or cover the surface with wet burlap to prevent premature drying.
Coverage Calculator
- At 3 kg/m² – Light to medium-duty flooring.
- At 5 kg/m² – Heavy-duty industrial flooring.
Suitable Applications
- Industrial and commercial floors
- Warehouses and workshops
- Parking areas, driveways, and loading bays
- Power plants, factories, and manufacturing units
Compatibility & Limitations
- Compatible with all standard concrete mixes.
- Not suitable for application on hardened concrete surfaces.
- Requires skilled application to ensure uniform finish.
Safety & Handling
- Wear safety gloves, goggles, and dust mask during application.
- Avoid inhalation of dust during dry shaking.
- Wash exposed skin thoroughly after use.
- Store in sealed bags in a dry, ventilated area.
Frequently Asked Questions
It’s a monolithic floor hardener used to improve the surface strength and durability of concrete floors.
It’s dry-shaken onto fresh concrete and finished with a power trowel to form a dense, hard surface.
Approximately 3–5 kg/m², depending on the required abrasion resistance.
Ideal for industrial, warehouse, parking, and workshop floors exposed to heavy traffic.
No, it must be applied monolithically on fresh concrete.
Yes, it forms a dense, dust-free, and abrasion-resistant surface.
Standard grey; other colors are available on request.
Achieves ≥ 80 MPa at 28 days, depending on base concrete quality.
Yes, the surface should be cured immediately after finishing using a curing compound or wet cover.
12 months in sealed packaging stored in dry, shaded conditions.
Rate us and Write a Review
- SundayDay Off
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
