Description
CONMIX JETCURE WB 75 is a high-quality, wax emulsion–based curing compound designed to minimize water loss from freshly laid concrete. It forms a continuous, uniform film on the surface, ensuring optimal cement hydration, reduced surface cracking, and enhanced concrete strength. Being water-based, JETCURE WB 75 is non-toxic, eco-friendly, and easy to apply — making it ideal for both indoor and outdoor applications where solvent-based products are not suitable.
Available Pack Sizes
• 5 L
• 25 L
• 200 L
Stock Status
In Stock
Product Highlights
- Wax emulsion–based, water-dispersed curing compound
- Minimizes water loss and improves hydration efficiency
- Reduces surface shrinkage and cracking
- Non-toxic, eco-friendly, and easy to apply
- Forms a tough, continuous, moisture-retaining film
- Ideal for large horizontal and vertical concrete surfaces
Technical Specifications
| Property | Specification |
|---|---|
| Base | Wax Emulsion in Water |
| Appearance | Milky white liquid (dries to a translucent wax film) |
| Specific Gravity | Approx. 0.95–1.00 @ 25°C |
| Drying Time | 60–90 minutes depending on temperature and humidity |
| Moisture Retention | Complies with ASTM C309 Type 2, Class A |
| Coverage | 4–6 m² per liter (depending on surface texture) |
| Application Temperature | 5°C to 45°C |
| Film Formation | Forms uniform, moisture-retaining wax film |
| Shelf Life | 12 months (in unopened condition) |
| Storage Conditions | Store in cool, shaded area. Protect from frost and direct sunlight. |
Application Instructions
- Surface Preparation:
- Apply once the concrete surface is free from bleed water and has reached final finishing.
- Application:
- Stir well before use to ensure even dispersion of wax emulsion.
- Apply uniformly using a spray, roller, or brush in a single coat.
- Ensure complete coverage for effective moisture retention.
- Note: Do not apply on surfaces where coatings or adhesives will be applied unless the wax film is removed.
Coverage Calculator
- 1 Liter covers approximately 4–6 m² depending on surface texture.
- 25 L drum covers approx. 100–150 m².
Suitable Applications
- Freshly placed concrete slabs and pavements
- Industrial and commercial flooring
- Bridge decks, runways, and precast units
- Exterior concrete exposed to wind or sunlight
Compatibility & Limitations
- Compatible with all standard concrete surfaces.
- Not suitable for use under subsequent coatings or flooring without surface preparation.
- Avoid application under strong wind or rain conditions.
Safety & Handling
- Non-flammable and safe for indoor or outdoor use.
- Wear gloves and safety goggles during application.
- Clean tools with water immediately after use.
- Keep containers sealed and avoid freezing temperatures.
Frequently Asked Questions
It’s a wax emulsion–based curing compound used to retain moisture in freshly placed concrete.
It forms a thin wax film that locks in water, allowing complete cement hydration and strength gain.
Yes, it’s a water-based, eco-friendly curing compound safe for indoor and outdoor use.
Approximately 4–6 m² per liter, depending on surface condition.
Typically 60–90 minutes, depending on ambient temperature and humidity.
Yes, it completely replaces traditional water curing.
Not directly — the wax film must be removed before applying paints or coatings.
Yes, it’s designed to perform well in hot, windy, or dry conditions.
It complies with ASTM C309 Type 2, Class A requirements.
12 months when stored in sealed containers away from sunlight and frost.
Rate us and Write a Review
- Closed Now07:30 AM - 05:00 PM
- Monday07:30 AM - 05:00 PM
- Tuesday07:30 AM - 05:00 PM
- Wednesday07:30 AM - 05:00 PM
- Thursday07:30 AM - 05:00 PM
- Friday07:30 AM - 05:00 PM
Your request has been submitted successfully.
Own or work here?
