CONMIX JETCURE RB is a high-performance resin-based curing compound formulated to retain moisture in freshly placed concrete to ensure complete hydration and optimal strength development. It forms a tough, continuous, and non-degrading membrane over the surface, effectively minimizing shrinkage and surface cracking. JETCURE RB eliminates the need for water curing and is ideal for use on large concrete pours, industrial floors, pavements, and precast elements. The cured surface is dust-free, dense, and ready for subsequent finishes or coatings.
Available Pack Sizes
• 25 L
• 200 L
In Stock
| Property | Specification |
|---|---|
| Base | Synthetic Resin Solution |
| Appearance | Clear / Pale Amber Liquid |
| Specific Gravity | Approx. 0.85–0.90 @ 25°C |
| Viscosity | Low viscosity – sprayable |
| Drying Time | 30–60 minutes (depending on temperature) |
| Moisture Retention | Meets ASTM C309 standards |
| Application Temperature | 5°C to 45°C |
| Coverage | 5–6 m² per liter (typical) |
| Shelf Life | 12 months (in unopened container) |
| Storage Conditions | Store in cool, dry place away from direct sunlight and open flame |
It’s used as a resin-based curing compound to retain moisture and ensure proper curing of fresh concrete.
Yes, it completely eliminates the need for water curing.
It forms a thin, impermeable membrane over the concrete surface to reduce evaporation.
Approximately 5–6 m² per liter, depending on surface texture.
Typically 30–60 minutes under normal temperature and humidity.
Yes, it’s suitable for both horizontal and vertical concrete surfaces.
Yes, it’s UV-resistant and designed for outdoor concrete curing.
Yes, as it’s solvent-based, handle with care and avoid open flames.
Only after the curing membrane is removed by mechanical or chemical means.
12 months in unopened containers stored away from direct sunlight.
Your request has been submitted successfully.
Own or work here?