CREPIPLASTER is a high-quality cement-based skim coat mortar formulated with basaltic sand for leveling and finishing block and concrete surfaces. It is designed for both interior and exterior use, providing a smooth, durable, and crack-resistant finish. The product is suitable for plastering and repair applications where surface uniformity and strong adhesion are required. CREPIPLASTER complies with EN 998-1 standards for performance and reliability.
Available Pack Size
• 20 Kg
In Stock
| Property | Specification |
|---|---|
| Base | Cement and basaltic sand |
| Standard Compliance | EN 998-1 (Skim coat mortar) |
| Color | Light Grey |
| Mixing Ratio | 5–6 L of clean water per 20 Kg bag |
| Application Thickness | 3–10 mm per coat |
| Coverage | 1.6–1.8 Kg/m²/mm thickness |
| Pot Life | Approximately 2 hours @ 25°C |
| Setting Time | 120–180 minutes |
| Shelf Life | 6 months (in unopened packaging) |
| Storage Conditions | Store in a cool, dry area protected from moisture |
It is used for surface levelling and finishing on block and concrete walls.
Yes, it is designed for both interior and exterior applications.
Mix 5–6 L of water per 20 Kg bag for a smooth consistency.
Apply in 3–10 mm layers depending on surface unevenness.
One 20 Kg bag covers approx. 2.2–2.4 m² at 5 mm thickness.
Setting time is 120–180 minutes under normal conditions.
Yes, after it is fully cured and surface is dry, it can be painted or coated.
On smooth or non-absorbent surfaces, apply a bonding primer like PRIME KEY+ first.
6 months in sealed packaging stored in a dry area.
No, CREPIPLASTER should be used as supplied without additives or modifications.
Your request has been submitted successfully.
Own or work here?