loaderimg
image

Description

X’TRASEAL Super Glue delivers an instant, high-strength bond for a wide range of materials. Perfect for quick repairs, precise assembly, and industrial use — ensuring fast drying and long-lasting adhesion on contact.

Pack Sizes

Available Pack Sizes
• 3 g x 12 pcs (Blister Pack)
• Single Tube – 20 ml

Stock

In Stock

Product Highlights

  • Ultra-fast bonding in seconds
  • Suitable for metal, rubber, plastic, wood & ceramics
  • Precision nozzle for clean application
  • Transparent finish after curing
  • Long shelf life with anti-clog cap design

Technical Specifications

PropertySpecification
BaseEthyl Cyanoacrylate
AppearanceClear, Transparent Liquid
ViscosityLow to Medium
Bonding Time5–15 seconds
Full Cure Time24 hours
Temperature Resistance-50°C to +80°C
Shelf Life12 months (in original packaging)
Storage ConditionsStore in a cool, dry place below 25°C

Application Instructions

    • Surface Preparation:
      Ensure surfaces are clean, dry, and free from grease, oil, or dust.
  • Application:
    • Apply a small drop on one surface.
    • Press surfaces together firmly for a few seconds.
    • Allow to set undisturbed for 5–10 minutes for best results.
  • Note: Use sparingly — a little goes a long way!

Coverage Calculator

Approx. 1 tube (3g) bonds up to 1–1.5 m² of small surface area depending on substrate and application thickness.

Suitable Applications

  • Plastic components
  • Wooden furniture & crafts
  • Metal joints
  • Rubber gaskets
  • Porcelain and ceramic items

Compatibility & Limitations

  • Not recommended for use on polyethylene (PE), polypropylene (PP), PTFE, or glass surfaces exposed to continuous moisture.
  • Compatible with most non-porous materials.

Safety & Handling

  • Avoid skin contact.
  • Use in a well-ventilated area.
  • Keep away from children and open flames.
  • In case of eye contact, rinse immediately with water and seek medical advice.

Frequently Asked Questions

It bonds most non-porous surfaces including metal, plastic, rubber, and ceramics.

Initial bonding occurs in 5–15 seconds under normal conditions.

Yes, it performs well on rubber and flexible plastics with minimal brittleness.

It provides moderate water resistance but is not suitable for full water immersion.

Keep tightly closed in a cool, dry place. Refrigeration extends shelf life.

Only if excessive glue is applied; use thin layers for clear finishing.

Temporary bonding possible, but not ideal for permanent structural use.

Yes, apply carefully avoiding circuit contact points.

Between -50°C to +80°C for best performance.

Use acetone or nail polish remover immediately before full curing.

Rate us and Write a Review

Your Rating for this listing

angry
crying
sleeping
smily
cool
Browse

Your review is recommended to be at least 140 characters long

image

Show all timings
  • Monday07:30 AM - 05:00 PM
  • Tuesday07:30 AM - 05:00 PM
  • Wednesday07:30 AM - 05:00 PM
  • Thursday07:30 AM - 05:00 PM
  • Friday07:30 AM - 05:00 PM

imageYour request has been submitted successfully.

building Own or work here? Claim Now! Claim Now!
image