A premium-quality PVA-based wood adhesive formulated for superior bonding of wood, engineered boards, and furniture components. Ideal for general carpentry, woodworking, and industrial wood assembly.
5.00 kg | 20.00 kg
In Stock (All pack sizes)
| Parameter | Technical Value |
|---|---|
| Chemical Composition | Polyvinyl Acetate (PVA) Dispersion |
| Base | Water |
| Solids Content | 42–50% |
| Viscosity | 8,000 – 12,000 cps |
| Film Appearance | Clear, flexible, non-brittle |
| Colour | White (dries transparent) |
| Density | ~1.05 g/cm³ |
| pH Value | 4.5 – 6.0 |
| Open Time | 5–8 minutes |
| Clamp Time | 20–30 minutes |
| Handling Strength | 45–60 minutes |
| Full Cure Time | 24 hours |
| Shear Strength (Wood-to-Wood) | ≥ 3.5 MPa |
| Tensile Strength | ≥ 4.0 MPa |
| Water Resistance | Interior Grade |
| Temperature Resistance | Up to 55–60°C (after curing) |
| Viscosity Stability | Stable between 10°C–30°C |
| Shelf Life | 12 months (unopened) |
| Storage Requirements | Keep between 10°C and 30°C; avoid freezing |
WD 279 is slightly thicker and offers better spreadability for large surfaces.
It dries clear and flexible, preventing joint cracking.
Yes, on the porous side of laminates.
Yes, for maximum strength.
No, not recommended.
Yes, after full curing.
Yes, low VOC and safe after curing.
Do not dilute with water; discard if excessively thick.
Minimal shrinkage due to high solids content.
18°C – 30°C is ideal for strong bonding.
Your request has been submitted successfully.
Own or work here?